1. YLSK-540 computer spring compression machine adopts Taiwan computer control system and Japan imported servo motor, which is convenient, fast, high speed and high precision.
2. The coilable steel wire is directly 1.5-4.0mm, the winding ratio is 3-8, and the maximum outer diameter of the spring is 80mm, such as cylindrical, conical, convex, concave, and tension and compression springs with variable pitch and diameter.
3. YLSK-540 computer controller. One axis is a wire feeding, which is driven by an imported servo motor with a power of 5.5KW, which can realize high-speed and high-precision wire feeding of any length. (The accuracy can reach ± 0.1mm, and the highest wire feed speed is up to 30m / min.).
4. The two and three axes are cut off. Two servo motors with a power of 1.5KW control the upper and lower cut-off sliders for fast movement. Cut and twist.
5. The four-axis is a variable-pitch mechanism, which is dragged by a servo motor with a power of 1.5KW. The high-precision rolling screw is used to move the pitch claw to ensure the high precision of the pitch.
6. The five-axis is a reducing diameter, which is dragged by a servo motor with a power of 1.5KW, and the reducing slider is driven by a cam and a flat lever to complete the reducing diameter. The lifting of the mandrel is controlled by a motor, which is convenient and labor-saving. During the production process, the machine has precise transmission, smooth movement, wear resistance and long life.
7. The machine adopts computer digital control, and any one of the five axes can move independently. It can also coordinate and coordinate any of these axes, making operation extremely convenient and simplifying the complicated debugging process.
8. YLSK-540 computer spring compression machine is a kind of spring processing equipment with high precision, high efficiency, reasonable structure, convenient use, simple debugging and good man-machine dialogue.
Machining wire diameter (mm)
Φ1.5 ～ Φ4.0
Processing speed (pieces / minute) max.machining speed
150 pieces / min
Instruction value of wire feed
± 0.01 ～ ± 9999.99mm
Instruction value of cam
± 0.10 ～ ± 359.90
Servo motor of wire feed (kw)
Servo motor of cam (kw)
Down-cut servo motor (KW)
Camshaft motor (KW)
Machine size (mm)
1600 * 1000 * 1750
380V & 3P